top of page

Open and Club Tournaments

Public·9 Players
Henry Williams
Henry Williams

Huawei DRA-LX2 Flash File: A Complete Guide to Repair Your Y5 Prime 2018 with Sp Flash Tool and DA Auth



Huawei DRA-LX2 Flash File Y5 Prime 2018 Sp Flash Tool DA Auth Fix Customer Care Firmware




If you have a Huawei DRA-LX2 Y5 Prime 2018 smartphone and you are facing some issues with it, such as bootloop, hang on logo, dead after flash, or FRP lock, then you might need to flash your device with the official Huawei DRA-LX2 flash file. This file contains the firmware and the scatter file that can help you restore your device to its original state.




Huawei DRA-LX2 Flash File Y5 Prime 2018 Sp Flash Tool DA Auth Fix Customer Care Firmware



However, flashing your Huawei DRA-LX2 Y5 Prime 2018 is not as simple as downloading the flash file and using any flash tool. You will need to use a specific tool called Sp Flash Tool and a special file called DA Auth file to bypass the secure boot protection of your device. Without these files, you will not be able to flash your device successfully.


In this article, we will show you how to download and use the Huawei DRA-LX2 flash file, Sp Flash Tool, DA Auth file, and customer care firmware to fix your device. We will also provide you with some tips and precautions to avoid any errors or damage during the flashing process.


What is Huawei DRA-LX2 Flash File?




Huawei DRA-LX2 flash file is a zip file that contains the official firmware and the scatter file for your Huawei DRA-LX2 Y5 Prime 2018 smartphone. The firmware is the software that runs on your device and controls its functions. The scatter file is a text file that tells the flash tool how to partition and format your device's memory.


By flashing your device with the Huawei DRA-LX2 flash file, you can update or downgrade your device's software version, fix any software bugs or errors, remove any viruses or malware, unlock your device's network or FRP lock, or restore your device to its factory settings.


What is Sp Flash Tool?




Sp Flash Tool is a software application that allows you to flash MediaTek (MTK) devices such as Huawei DRA-LX2 Y5 Prime 2018. It supports various features such as flashing firmware, custom recovery, format, backup, and more. It also supports different modes such as download only, firmware upgrade, format all + download, memory test, parameter setting, etc.


Sp Flash Tool is compatible with Windows and Linux operating systems. You can download the latest version of Sp Flash Tool from its official website or from any trusted source online. You will also need to install the MTK USB drivers on your computer to connect your device to Sp Flash Tool.


What is DA Auth File?




DA Auth file is a binary file that contains the authentication data for your device's secure boot system. Secure boot is a feature that prevents unauthorized access to your device's bootloader and firmware. It verifies the signature of the firmware before allowing it to run on your device.


However, some devices such as Huawei DRA-LX2 Y5 Prime 2018 have a more advanced secure boot system that requires an additional authentication from a server before allowing the firmware to run. This authentication is provided by the DA Auth file. Without this file, Sp Flash Tool will not be able to flash your device and will show an error message such as "Authentication file needed" or "DA connection failed".


You can download the DA Auth file for your Huawei DRA-LX2 Y5 Prime 2018 from any reliable source online. You will need to load this file in Sp Flash Tool before flashing your device.


What is Customer Care Firmware?




Customer care firmware is a special firmware that is provided by the manufacturer or the service center to fix some common issues with your device. It is usually different from the official firmware that you can download from the manufacturer's website or from any online source. It may have some extra features or modifications that can help you solve your problem.


For example, some customer care firmware may have a FRP bypass option that can help you remove the Google account verification lock from your device. Some customer care firmware may also have a network unlock option that can help you use any SIM card on your device. Some customer care firmware may also have a pre-rooted option that can give you root access to your device.


You can download the customer care firmware for your Huawei DRA-LX2 Y5 Prime 2018 from any trusted source online. You will need to flash this firmware using Sp Flash Tool and DA Auth file.


How to Flash Huawei DRA-LX2 Y5 Prime 2018 with Sp Flash Tool and DA Auth File?




Now that you have downloaded all the necessary files for flashing your Huawei DRA-LX2 Y5 Prime 2018, you can follow these steps to flash your device:


  • Extract the Huawei DRA-LX2 flash file zip file on your computer. You will get a folder with the firmware and the scatter file.



  • Extract the Sp Flash Tool zip file on your computer. You will get a folder with the Sp Flash Tool exe file and some other files.



  • Run the Sp Flash Tool exe file as administrator on your computer.



  • Click on the "Choose" button under the "Download-Agent" section and browse to the DA Auth file that you have downloaded for your device.



  • Click on the "Choose" button under the "Scatter-loading File" section and browse to the scatter file that you have extracted from the Huawei DRA-LX2 flash file folder.



  • The Sp Flash Tool will load all the partitions of your device's firmware. You can uncheck any partition that you don't want to flash or leave them all checked if you want to flash the whole firmware.



  • Click on the "Download" button at the top of the Sp Flash Tool window.



  • Turn off your Huawei DRA-LX2 Y5 Prime 2018 and remove the battery if possible.



  • Connect your device to your computer using a USB cable while holding the volume down or volume up button. This will put your device in download mode and Sp Flash Tool will detect it.



  • The flashing process will start and you will see a progress bar at the bottom of the Sp Flash Tool window. Wait until it reaches 100% and shows a green tick mark.



  • Disconnect your device from your computer and insert the battery if you removed it.



  • Turn on your device and wait for it to boot up. It may take some time for the first boot so be patient.



Congratulations! You have successfully flashed your Huawei DRA-LX2 Y5 Prime 2018 with Sp Flash Tool and DA Auth file.


Tips and Precautions for Flashing Huawei DRA-LX2 Y5 Prime 2018




Before you flash your Huawei DRA-LX2 Y5 Prime 2018 with Sp Flash Tool and DA Auth file, you should keep in mind some tips and precautions to avoid any errors or damage to your device:


  • Backup your device's data before flashing. Flashing will erase all your data and settings on your device. You can use any backup app or tool to backup your contacts, messages, photos, videos, apps, etc.



  • Charge your device's battery to at least 50% before flashing. Flashing can take some time and consume some power. If your device's battery dies during the flashing process, it can cause a hard brick or damage to your device.



  • Use a good quality USB cable and a working USB port on your computer. A faulty USB cable or port can interrupt the connection between your device and Sp Flash Tool and cause errors or failures during the flashing process.



  • Do not disconnect or turn off your device or computer during the flashing process. This can also cause a hard brick or damage to your device.



  • Do not flash any firmware or file that is not compatible with your device's model or region. This can cause a soft brick or bootloop on your device. You can check your device's model and region by going to Settings > About Phone on your device.



  • Do not flash any custom firmware or file that is not verified or tested by the developer or the source. This can also cause a soft brick or bootloop on your device. You can check the reviews or comments of the firmware or file before downloading it.



By following these tips and precautions, you can flash your Huawei DRA-LX2 Y5 Prime 2018 with Sp Flash Tool and DA Auth file safely and successfully.


Conclusion




In this article, we have shown you how to flash your Huawei DRA-LX2 Y5 Prime 2018 with Sp Flash Tool and DA Auth file. We have also explained what are the Huawei DRA-LX2 flash file, Sp Flash Tool, DA Auth file, and customer care firmware and how they can help you fix your device. We have also provided you with some tips and precautions to avoid any errors or damage during the flashing process.


Flashing your Huawei DRA-LX2 Y5 Prime 2018 with Sp Flash Tool and DA Auth file can be a simple and effective way to solve any software issues with your device. However, you should always be careful and follow the instructions carefully to avoid any risks or complications. If you have any doubts or questions, you can always contact the manufacturer or the service center for more assistance.


We hope this article has been helpful and informative for you. If you liked this article, please share it with your friends and family who might need it. Thank you for reading! b99f773239


https://www.erlendurmagazine.com/group/erlendur-magazine-group/discussion/d81620c3-837e-489d-af50-9c9f268277b0

https://www.taekwondomorelos.com/group/novice-karate-group-ages-8-up/discussion/d57553bb-fe43-467f-88df-7cb51bcea325

https://www.niyo-yoga.com/group/aroma-w-shops/discussion/55de504d-28ec-44b3-9487-c5197180e934

About

This is for all players that cannot commit to the league pla...

Players

  • Facebook
  • Twitter
  • YouTube
  • Instagram
bottom of page