Download the Driver for CC2531 USB Dongle and Access Its Firmware Library and Examples

I started with Sonoff ZIGBEE 3.0 USB DONGLE PLUS. As I was setting everything up for my test, I noticed that the firmware i posted is in the 2.7.0 version. If you want to install it, follow the steps in the guide, otherwise the device is unreachable. It is however fine to stick to the firmware posted as long as you have the Sonoff ZIGBEE 3.0 USB DONGLE PLUS connected.

cc2531 usb dongle driver download

If you are lucky, this works fine and your ZIGBEE 3.0 USB DONGLE PLUS is ready for action! If not, you can also try the following command, which will Force the driver installation. Again, I dont recommend it because you dont know how DSM 7 will evolve in the future and how this might affect your NAS.

You should never be too far away from your Sonoff ZIGBEE 3.0 USB DONGLE PLUS. According to the Sonoff website, the firmware is bugged and you get non functional devices, although the settings seem to work fine.

Sonoff ZIGBEE 3.0 USB DONGLE PLUS is powered by 2 x AAA/C alkaline batteries (power can be increased by up to 5V). Sonoff ZIGBEE 3.0 USB DONGLE PLUS also has integrated WiFi and Bluetooth. For now Zigbee is not supported, but thanks to the community, a barebones version was released earlier this year. The difference is that it already has ZigBee support, and that it does not need a firmware to run.

Other than that, we welcome Sonoff ZIGBEE 3.0 USB DONGLE PLUS to be added to our list. As always, full instructions for flashing the device with firmware can be found in the project source code repository .