Where To Buy Sump Pump Battery
A sump pump is one of the most important (and most ignored) disaster prevention devices in a home. When this simple system fails, the results can be catastrophic, leading to thousands of dollars in damage, daily disruptions caused by major repair work and higher insurance premiums for years to come. So spending some time and money on avoiding failure makes a lot of sense. Here find out how long sump pumps last.
where to buy sump pump battery
Water-powered pumps come in two styles: in-sump and above-sump. An in-sump pump (one choice is the Liberty No. SJ10 SumpJet pump, available through our affiliation with Amazon.com) is always immersed in drain water, which raises the risk that drain water could contaminate the drinking water supply. To prevent that, most local codes require the installation of an expensive reduced pressure zone (RPZ) backflow prevention valve. RPZ valves must be professionally installed and tested annually by a licensed plumber. That adds an annual cost to the system. So check with your local building inspection department before you buy an in-sump system.
An above-sump unit mounts well above the sump, which reduces the risk of drinking water contamination (one choice is the Basepump RB750-EZ; sold at Amazon.com). Therefore, many plumbing inspectors require only a less expensive atmospheric vacuum breaker (AVB).
When the primary pump fails, a water-powered pump uses city water pressure to siphon water out of the sump. With an in-sump version, your local inspector may require an RPZ valve to prevent contamination of drinking water.
3. Spend the money to get a quality sump pump. Look for a caged or vertical float switch, a motor with a UL and a CSA rating, and a pump made with a stainless steel, cast aluminum or cast iron impeller and pump body. Avoid pumps made from epoxy-coated parts. Find out the cost of a sump pump.
Installation videos demonstrate how easy it is to install a Basement Watchdog battery backup and AC sump pump. Be sure to watch the video on installing a combination system and witness for yourself how easy it can be.
We encourage you to explore our website to learn more about backup sump pumps and the complete line of Basement Watchdog products. This site will help you decide which system best fits your needs. Throughout the Basement Watchdog site you will find a variety of information on everything from the benefits of a battery backup system to how to install one.
As a general rule of thumb, during a power outage most new fully-charged batteries will last roughly 5-7 hours of continuous pumping and roughly 1-3 days of non-continuous pumping depending on the frequency. The longer the pump runs, the less power it has. This decline in battery power continues until the pump is completely overwhelmed by the water flowing into the sump pit and your basement floods.
Not only that, but the more powerful the pump, the shorter the run-time. Generally, backup pumps are either 1/4 HP or 1/3 HP. A 1/4 HP pump will have a lower current draw from the battery, maximizing the battery life. A more powerful 1/3 HP pump may pump faster, but it will also drain the battery quicker. Often times battery backup manufacturers will recommend a more expensive battery to accompany their relatively more powerful pumps.
In wet-cell batteries, the most common type of lead-acid batteries used with sump pumps, this often happens because the lead plates within the battery become corroded over time and lose their ability to hold a charge.
It is very common for homeowners that think they are protected with a battery backup to experience a flood due to an older battery. If the power outage outlasts the battery charge, you will effectively have no pump and your basement can quickly flood.
However, water-powered pumps will run for an unlimited amount of time. This is one of the primary benefits of these pumps. Since they do not need a battery, there is no need to worry about battery replacement or run-time limits.
Batteries designed for backup sump pumps will last a limited amount of time. The largest manufacturer of battery backups recommends that you replace the battery with a new one every three years. In addition to the required battery replacement, battery backup sump pumps can mechanically fail after prolonged use.
The actual pumps provided with emergency battery backups typically are either 1/4 HP or 1/3 HP. Depending on how powerful the pump is, most backups are rated to pump between 800 and 2,000 GPH, but that is only with a brand new, fully-charged battery.
Protect your basement from flooding and gain peace of mind with the A1500SP1 Sump Pump Battery Backup from CyberPower. The A1500SP1 works with an existing sump pump up to 1/2 HP in capacity and ensures sump pump operation for up to two hours*. Installation is simple and no additional components are required, so you can begin backing up your sump pump quickly and without professional assistance. Additional features include surge protection, automatic voltage regulation, and audible alarms. The A1500SP1 comes with a two-year warranty including coverage of batteries.
This type of UPS tolerates undervoltage brownouts and overvoltage surges without consuming backup battery power by automatically selecting different power taps on the AVR autotransformer. During normal operation, incoming AC power bypasses the autotransformer (where voltage highs and lows are controlled) while also charging the battery. When the incoming voltage falls below the AVR range, the UPS switches to battery backup, and the DC-AC inverter circuitry is engaged. Power will continue to be supplied by the battery-inverter circuit until incoming voltage returns to the range manageable by the AVR.
Have peace of mind with a dependable sump pump battery backup system from Little Giant. The APS Series is a fully automatic charging system applicable for sump, effluent, and sewage pump power backup. It operates a 115-volt pump up to 1/2 horsepower.
Typically installed adjacent to the primary electric pump in the sump basin, the APS Series sump pump battery backup offers a fully automatic backup should an electrical power outage occur. Able to power up a 115 volt with up to 1/2 horsepower motor, the APS Series provides satisfaction knowing there's a reliable ally on guard.
Another consideration when deciding whether you need a battery backup is the presence of a generator in your home. A generator will help with power outages, but it will not be very useful if your sump pump fails due to age. It also will not assist with giving your sump pump an extra boost if the pump begins to get overwhelmed. A battery backup is also the more affordable option of the two.
Both types of backup sump pump have their advantages and drawbacks. The decision over which to use in your home will be driven by your specific plumbing system setup, your water volume needs, and other preferences. To get a sense for which pump type is right for your home, consider the following attributes of each pump and see which best matches your specific situation.
People often assume that these pumps are highly complex, because at first glance it may not be obvious exactly how water powered sump pumps work. However, their operating principle is actually very simple: run water through a pipe at high speed to generate suction, which then empties your sump pit.
Note: This article refers to the specific features of Hydropump battery backup sump pumps and Basepump water powered sump that we sell, and is not intended as commentary on the specific attributes of other brands on the market.
Most Chicago homes have basements, so smart Chicago homeowners have sump pumps. What some may not realize is that there are many ways a sump pump can fail, leading to flooding and the expensive cleanup and repairs that come with it. A Chicago sump pump battery backup provides several hours of additional protection when power outages, too much water, or an overheating motor causes your main pump to fail.
Water-powered sump pumps have a lower pumping rate compared to their alternatives. They can remove, on average, 1,324 gallons of water per hour, while battery-powered backups remove up to 2,400 gallons of water per hour.
If your home has a basement, you probably have a drainage system. Sump pumps keep your basement dry by pumping out water that collects in the pit. If flooding or dampness is a problem, you may need to invest in a sump pump, but which one?
There are many different kinds of pumps and several models for each type. The right type and model for you will depend on your needs. The brand to choose, however, is a bit easier. Zoeller is an excellent brand with almost 80 years under their belt. Professionals trust Zoeller pumps and they have an excellent reputation. Zoeller sump pumps are reliable and efficient, and there are plenty of models to choose from for every type of pump you might need.
Combination sump pumps are a compilation of primary sump pumps and battery backup sump pumps. This pump is the best of both worlds, protecting you under normal circumstances and in emergencies as well.
A battery backup system for a sump pump consists of two main components: an inverter/charger and one or more batteries. The inverter is responsible for converting the power stored in the batteries into a form that can be used by your sump pump. It is also responsible for keeping the batteries fully charged at all times. You plug the inverter/charger into your wall outlet and then plug your sump pump into the inverter/charger, like this:
Note the red arrows showing the flow of electricity. During normal operation, the inverter/charger just passes the electricity coming from your wall outlet straight through to the sump pump as though the sump pump was plugged directly into the outlet. While it is doing that, it will also automatically charge the batteries and keep them fully charged as long as it continues to receive power from the wall outlet. 041b061a72